STRUCTURE AND FINISHES
Types B-1 and B-2 Maisonettes (Block 1)
(a) Structure:
Reinforced concrete structure on R.C. spread footings.
(b) Bricks:
All walls are constructed with burnt clay bricks.
(c) Roofing Tiles:
Pitched roof with interlocking concrete tiles.
(d) Roof Timber:
Keruing or equivalent structural timber pressure-treated by "Tanalith" or similar process.
(e) Ceiling:
Generally plaster-board or false ceilings to top floor. Other ceilings in cement/sand plaster to underside of R.C. slabs.
(f) Windows:
Colour-anodised aluminium-framed windows to living rooms, bedrooms, kitchen and bathrooms.
(g) Doors:
(i) Entrances — solid timber door.
(ii) Bedrooms — plywood flush door.
(iii) Bathrooms — waterproof plywood flush door.
(h) Locks:
Good quality brand lock sets to be used.
(i) Decoration:
(i) 2 coats emulsion paint for internal walls.
(ii) 2 coats `Mapla' paint for cement-plastered external walls.
(iii) 2 coats gloss enamel paint for steel and woodwork.
(j) Flooring:
(i) Living, dining, balcony/patio, kitchen, bathrooms, service area
-ceramic tiles
(ii) Bedrooms, upper hall and staircase
-lacquered teak parquet
(k) Wall Tiles:
Generally in all bathrooms and kitchen —coloured/patterned ceramic wall tiles to ceiling height.
(l) Sanitary Installation:
Good quality coloured sanitary fittings provided. Stainless steel kitchen-sink in built-in cupboard. Hot and cold water service in concealed copper piping to bathrooms (excepting servants') and kitchen.
(m) Electrical Installation:
Concealed wiring in accordance with P.U.B.'s requirements. Light and power points according to schedule.
a) Ceiling light, Type B-1 (16), Type B-2 (16)
b) Wall light, Type B-1 (9), Type B-2 (10)
c) 13 amp power point, Type B-1 (21), Type B-2 (21)
d) 15 amp power point, Type B-1 (4), Type B-2 (4)
e) Ceiling fan point, Type B-1 (5), Type B-2 (5)
f) Water heater point, Type B-1 (1), Type B-2 (1)
g) Cooker point, Type B-1 (1), Type B-2 (1)
h) Bell point, Type B-1 (1), Type B-2 (1)
i) C.A.T.V./F.M. point, Type B-1 (2), Type B-2 (2)
j) Telephone point, Type B-1 (2), Type B-2 (2)
One Electrical water heater will be provided to each unit.
STRUCTURE AND FINISHES
Type 'A' Apartments (Blocks 2, 3 and 4)
(a) Structure:
Reinforced concrete structure on R.C. bored pile foundations.
(b) Brick:
All walls are constructed with burnt clay bricks.
(c) Roof:
R.C. slab roof with pre-cast concrete insulation panels.
(d) Ceilings:
Ceilings are in either cement/sand plaster to underside of R.C. slab or plaster board.
(e) Windows:
Colour-anodised aluminium-framed windows to living rooms, bedrooms, kitchen and bathrooms.
(f) Doors:
(i) Entrances — solid timber door.
(ii) Bedrooms - plywood flush door.
(iii) Bathrooms - water proof plywood flush door.
(g) Locks:
Good quality brand lock sets to be used.
(h) Decoration:
(i) 2 coats emulsion paint for internal walls.
(ii) 2 coats `Mapla' paint for cement-plastered external walls.
(iii) 2 coats gloss enamel paint for steel and woodwork.
(i) Flooring:
(i) Living, dining, balcony, kitchen, bathrooms, service area
-ceramic tiles
(ii) Bedrooms
-lacquered teak parquet
(j) Wall Tiles:
Generally in all bathrooms and kitchen coloured/patterned ceramic wall tiles to ceiling height.
(k) Sanitary Installation:
Good quality coloured sanitary fittings provided. Stainless steel kitchen-sink in built-in cupboard. Hot and cold water service in concealed copper piping to bathrooms (excepting servants') and kitchen.
(l) Electrical Installation:
Concealed wiring in accordance with P.U.B.'s requirements. Light and power points according to schedule.
Type 'A' Apartment
a) Ceiling light (16)
b) Wall light (21)
c) 13 amp power point (40)
d) 15 amp power point (4)
e) Ceiling fan point (5)
f) Water heater point (1)
g) Cooker point (1)
h) Bell point (1)
i) C.A.T.V./F.M. point (2)
j) Telephone point (2)
One Electrical water heater will be provided to each unit.
