Foundation
Reinforced concrete piles (Grade 45)
Sub-Structure & Super-Structure
Reinforced concrete Grade 30, 35 & 40
Wall
External & internal walls: Reinforced concrete and/or Common clay bricks
Roof
a) Pitch roof :
Clay roof tiles with double-sided aluminium foil insulation Tanalized timber roof rafters
b) Flat roof :
Reinforced concrete flat roof with appropriate waterproofing system
Ceiling (For Apartments)
a) Living/Dining, Bedrooms, : Cement/sand plaster skim Utility, Store & Yard coating and/or plaster ceiling board with emulsion paint
b) Kitchen, Bathrooms Plaster ceiling with & W.C. emulsion paint
Finishes
a) Wall (For Apartments)
i) Living/Dining, Bedrooms, Utility, Store & Yard
Cement/sand plaster with emulsion paint finish
ii) Kitchen, Bathrooms : Ceramic tiles to underside & W.C. of ceiling
b) Wall (For Common Areas)
Internal Wall
i) Basement Carpark Cement/sand plaster with emulsion paint finish
ii) Staircase and Corridor:
Cement/sand plaster with emulsion paint finish
iii) Lift Lobby
Cement/sand plaster with emulsion paint finish
External Wall:
Cement/sand plaster and/or skim coating with acrylic emulsion paint finish
c) Floor (For Apartments) :
i) Living/Dining:
Marble with and timber skirting
ii) Bedrooms :
Teak parquet in matt finish with timber skirting
iii) Kitchen, Bathrooms, W.C. Utility, Store & Yard :
Ceramic tiles
iv) Private Enclosed Space :
Slate tiles
d) Floor (For Common Areas)
i) Lift Lobbies :
Ceramics with design border
ii) Basement Carpark :
Cement/sand screed with hardeners
(Note : Marble, granite, slates are natural stone materials containing veins with tonality differences. There will be color and marking caused by their complex mineral composition and incorporated impurities. While such materials can be pre-selected before installation, this non-conformity cannot be totally avoided.)
Windows
Aluminium framed casement and/or top hung windows
(Note : All aluminium framed windows shall be anodized or powder coated. All glazing thickness is 6mm and tinted. All glazing up to 1 in from the floor level shall be of tempered and/or laminated glass)
Doors
a) (i) Main Entrance :
Approved fire-rated solid decorative timber door
(ii) Living to PES :
Aluminium framed sliding doors
(iii) Bedrooms & Bathrooms :
Hollow core decorative timber door
(iv) Dining & Kitchen :
Hollow core decorative timber door with infill fixed clear glass panel
(v) Store & Utility :
Hollow core decorative timber door or PVC folding door
(vi) Yard to PES :
Decorative mild steel grille door
b) Ironmongery
Good quality locksets
(Note : All aluminium doors shall be anodized or powder coated)
Sanitary Fittings
a) Masterbath
• 1 longbath complete with bath/shower mixer
• 1 granite/marble vanity top with undercounter basin and mixer tap
• 1 pedestal water closet
• 1 mirror
• 1 soap holder
• 1 paper holder
• 1 towel rail
b) Common Bath
• 1 shower place with shower mixer
• 1 granite/marble vanity top with undercounter or wall hung basin and mixer tap
• 1 pedestal water closet
• 1 mirror
• 1 soap holder
• 1 paper holder
• 1 towel rail
c) W.C.
• 1 pedestal water closet
• 1 shower set
• 1 paper holder
• 1 soap holder
Electrical Installation
Ample electrical points will be provided. TV/FM/Telephone outlet provided for Living and Bedrooms.
Lighting Protection
In compliance with Singapore Standard CP 33:1985
Waterproofing
Waterproofing to floors of Kitchen, Bathrooms, W.C. & Yard
Soil Treatment
Anti-termite soil treatment by specialist
Other Items
a) Kitchen cabinets :
High and low level kitchen cabinets with laminate counter top and double bowl single drainer kitchen sink, **hob a, **hood
b) Air-conditioning :
**Split-unit air-conditioning to all Bedrooms
c) Intercom :
Intercom to each apartment
d) Water Heater
* *Water heater to provided
**where warranties are given by the manufacturers and/or contractors and/or suppliers of the above installation, the Vendor shall assign to the Purchaser such warranties at the time when possession of the building unit is delivered to the Purchaser PROVIDED ALWAYS that the Vendor shall not be liable nor be answerable or responsible to the Purchaser for any failure on the part of the manufacturers and/or contractors and/or suppliers to maintain or repair for any defects occurring thereto.
